Beamalloy.net
Home
Contact Us
Standard IBED Coatings
TiN Titanium Nitride Coating
Cr2N Chromium Nitride Coatings
Surface Applications
Tablet Compression Tooling
Plastic Mold Tooling Surface Applications
Industries Served for Coating Applications, IBED Coatings for Pharmaceutical, Medical, Plastics, Aer
Pharmaceuticals/Nutraceuticals/OTC Industries Served
Medical Industries Served
Plastic Molding Industries Served
Automotive Industries Served
Aerospace Industries Served
IBED Technology
What is IBED TECHNOLOGY?
IBED Coating Properties
Coating Comparison
Technical Papers
About Beamalloy
        Plastic Molding  
 


The performance demands on molds and wear parts used to process plastics have risen dramatically.  In large part, this comes with the use of highly engineered resins, glass and mineral filled plastics. Materials issues, more complex part designs, and increasing production demand often requires more than the raw tool can provide.  Beamalloy IBED surface treatments provide enhanced wear and corrosion protection, while eliminating many of the problems found with conventional coating techniques.Plastic Molding

  • No Distortion -- Temperature < 200F
  • No Chipping of Flaking -- Excellent adhesion
  • No Re-Polishing -- Precise surface replication
  • No Regrinding -- No asymmetric build-up
  • No Cracks or Pinholes -- Fully dense
  • Wide variety of coatings available
  • Wide variety of base materials can be coated

Beamalloy IBED can be applied to the full range of ferrous alloys (tool steels, alloy steels, stainless steels, powdered alloys) as well as carbides, copper alloys, aluminum alloys, and nickel alloys.  Options include metallic (chromium and nickel), hard nitrides (titanium nitride and chromium nitride) and others.  Replication of your original original finish eliminates the need to re-polish after treatment.  Metallurgically bonded to the substrate, they provide incredible durability and do not chip or flake off. All Beamalloy IBED coatings are crack-free, fully-dense, and pinhole-free thereby to provide excellent wear and corrosion-resistance.

Plastic Molding

  • Injection Mold Cores
  • Injection Mold Cavities
  • Blow Mold Core Rods
  • Sleeves
  • Extrusion Dies
  • Calibrator Dies
  • Nozzle Tips
  • End Caps
  • Screw Tips
  • Check Rings
  • Rear Seats

For more information, contact us.

 

 

 
 
 

Beamalloy Technologies, LLC
8270 Estates Parkway
Plain City, OH 43064
www.beamalloy.net
Phone: (614) 873-4529
FAX: (614) 873-0167
US and Worldwide Patents
Issued and Pending
2010 Beamalloy Technologies, LLC